background image

2

DCUH-1 control unit operates electro-hydraulic dock 
levelers with hinged lip of DLHH/DLHHI series.
The unit is equipped with an uncontrolled movement 
protection system, which is activated if the dock leveler  

was halted in the event of a potential emergency or if  
power supply failed.
After all the necessary connections, it is ready for oper-
ation.

1. GENERAL INFORMATION

GENERAL INFORMA

TION

Options

DCUH-1

Automatic return to stored position by pressing the P button 

Supply voltage, 380-415 V / 50-60 Hz

ƒ

External traffic light

Internal traffic light

Dock leveler lighting

Leveler locking when door is closed (interlock)

ƒ

Door locking when leveler is open (interlock)

ƒ

Connection of additional safety devices

ƒ

Service indicator

Menu screen (LCD display)

Door control

Inflatable dock shelter control

Table 1.1. Control unit options

Table 1.2. Control unit specifications

Parameters

Value

Supply voltage

380–415 V / 50–60 Hz

Control voltage

24 VDC

Max. power of the hydraulic station

1,5 kW

Operating temperature

-20…+50 °С

Dimensions (W 

u

 H 

u

 D) 

195 

u

 355 

u

 165 mm

Protection class

IP54

2. SAFETY RULES

 

ƒ

Use the control unit only for its intended purpose, any 
other use is prohibited.

 

ƒ

The manufacturer assumes no liability for damage or 
injury to persons or property which occur as a result of 
failure to observe safety rules specified herein or incor-
rect use of the control panel.

 

ƒ

Only trained personnel should install, operate or service 
this equipment.

 

ƒ

Correct operation of the control unit can only be guar-
anteed if the supply voltage complies with the specified 
in the instructions. 

 

ƒ

Prior to first actuation of the control unit, make sure 
that all electrical connections are securely fastened and 
insulated, safety devices are installed and ready for use.

WARNING!

Carefully follow all the instructions specified herein. Failure to do so could cause equipment damage and/or personal 
injury!

Summary of Contents for DCUH-1









Reviews: