doona ISOFIX Base, User Manual

Page: 21 / 28

23
6.2. Removing the Doona Car Seat
from the Doona ISOFIX Base
1.
Step 1: Rotate the Doona Car Seat handle from position C to
upright position B.
Step 2: Hold the Doona Car Seat handle with one hand, and
press the Doona release button (#3) with the other hand.
You should press down the small top button, and while it is
pressed down push the entire Doona release button (#3) for-
ward until it clicks in place and the Doona color indicator (#4)
turns red. While pressing the Doona release button (#3), tilt the
Doona toward your body until it is released from the Doona
anchor points (#1).Once the Doona Car Seat is disconnected
from the base, lift the Doona and place it outside of the car.
Step 3: Unfold the Doona Car Seat wheels, rotate and extend
the handle to ‘stroller mode’ and you are ready to go!
Note: For further information about unfolding the Doona Car Seat
and adjusting the handle, please refer to the Doona Car Seat
User Guide.
(continues on next page)
I NS T A L L ING AND RE MO VIN G OF THE D OO NA CAR S E AT F RO M T HE DO ON A IS OF IX BASE