dooch NSQ Series, Manual

Page: 15 / 34

-Run and Stop LEDs indicate status of the drive.
-In case of drive error, Alarm2 lamp will be turned on. In case of alarm
for pump system, Alarm1 lamp will be turned on.
Functional Description of each Part
LED Lamps
LED lamps consist of Run, Stop, Alarm1 and Alarm2 and functions of them are as follows:
- Functions of each Button
FND Part
FND consists of five digits of 7-segment and displays status value of drive and pump and
parameter settings. FND displays are divided into St group (Status Group), Pr group (Pump
Control Group) and dr group (Drive Group).
Button Part
Button part consists of four buttons and it is used for parameter setting or
movement.
Drive
Operation
Turned on for waiting and flickered on operation
Turned on during stop
Turned on for High Pressure/Low Pressure/Sensor Error/Low Level Alarms Run
Stop
Alarm1
Alarm2
Turned on for drive error
It is used for setting up pressure settings, various parameters or Alarm Reset
It operates or stops the drive.
On operation state, RUN lamp will be turned on.
It is used to change parameter items or parameter settings. Key increases
key decreases the value After changing the settings,
o press key for saving the final value. If pres
the value, while le
be sure to press be sure t
for 3 seconds, parameter group is moved.