background image

18

MY ELECTRONIC DRUM

Location selection

It should be avoided to place the product 
in the following places, otherwise there is 
a risk of fire and electric shock.
● High temperature or dusty places.
● Kitchen or other places with lampblack.
● Where the product is exposed to direct 
    sunlight, or any other place where the 
    product will produce high temperature.

Volume

Don't play music long and loud. Pay special 
attention when using headphones. 
Excessive volume can damage your hearing.

Heavy

Do not place heavy objects on this product. 
Otherwise, the top of the product will be 
overweight, causing the product to 
overturn or drop objects on it, which will 
lead to the risk of injury.

Correct assembly of scaffolds

The incorrect assembly of the bracket may 
overturn, causing the product to fall off 
and posing a risk of injury to personnel. 
Therefore, it must be assembled according 
to the instructions in the attached 
installation guide to ensure that the 
product is properly mounted on its 
bracket.

Falling or colliding

If the product falls or is damaged by strong 
impact, it will be in danger of causing fire 
and electric shock. In case of the above 
situation, the following operations shall be 
performed immediately:
1. Turn off the power supply.
2. If you are using a power cord for power 
    supply, you need to unplug it from the 
    wall outlet.
3. Contact your distributor.

Plastic bag

Do not let anyone put plastic bags for this 
product on his head or in his mouth. 
Otherwise, there is a risk of asphyxia. 
Families with young children should pay 
special attention to it.

Keep a distance from the product 

and the bracket

Climbing the bracket is dangerous of 
overturning or damage. Families with 
young children should pay special 
attention to it.

Put

Avoid placing the product on an uneven 
surface or any other unstable place. 
Otherwise, it will cause the product to fall 
down, which will lead to the risk of injury.

Product Mobility

Before moving this product, you must 
unplug the power cord plug from the wall 
outlet and pull out all other cables and 
connecting wires. Otherwise, it will lead to 
damage of power or connection wires, 
resulting in fire and electric shock.

clean

Before cleaning this product, you must 
unplug the power cord plug from the wall 
outlet, otherwise there is a risk of fire and 
electric shock.

Jack

The socket of this product can only be 
connected to the designated equipment 
and devices. Connecting non-designated 
equipment or devices is dangerous of 
causing fire and electric shock.

SAFETY PRECAUTIONS

Summary of Contents for DED-200





















Reviews: