background image

BE CAREFUL

The improper use of power cord may cause 
fire and electric shock. The following 
precautions must be observed:
● Never put the power cord near the oven 
    or other heat source.
● Do not pull the cable when pulling out of 
    the power socket. The main body of the 
    plug must be grasped.
● The power cord plug must be inserted in 
    the socket to the end.
● Make sure the power supply is off before 
    connecting or disconnecting it.
● When thunderstorms occur or before 
    traveling or other long-term departure, 
    disconnect the power cord from the wall 
    outlet.
● At least once a year, remove the power 
    cord from the wall outlet and clean the 
    dust accumulated around the plug.

Do not burn this product

Do not put this product in the fire, 
otherwise it will lead to product 
combustion and explosion of internal 
electronic components, which will cause 
fire and personnel injury.

Water and foreign bodies

Water, other liquids and (metal sheets, etc.) 
entering this product are in danger of 
causing fire and electric shock. In case of 
the above situation, the following 
operations shall be performed immediately:
1. Turn off the power supply.
2. If you are using a power cord for power 
    supply, unplug it from the wall outlet.
3. Contact your distributor.

Disassembly and transformation

Do not disassemble or transform the 
product in any way, otherwise there is a 
risk of electric shock, scald or other 
personal injury. All internal inspection, 
adjustment and maintenance operations 
should be entrusted to your distributor.

WARNING

Smoke, odor, overheating

When the product smokes, smells or 
overheats, there is a danger of fire and 
electric shock when it is used continually.
In case of the above situation, the following 
operations should be performed immediately:
1. Turn off the power supply.
2. Pull the plug out of the power outlet.
3. Contact your dealer.

Power cord

1. The improper use of power cord may 
    cause fire and electric shock. The following 
    precautions must be observed:
● The special power cord designated for 
    this product must be used.
● The AC power supply with output 
    voltage within the rated voltage range 
    for household use must be used.
● Do not overload power sockets and 
    extension lines.

2. The improper treatment of power line 
    will lead to its damage or breakage, 
    which will cause fire and electric shock 
    hazards. The following precautions must 
    be observed:
● Do not place or heat heavy objects on 
    power lines.
● Do not attempt to alter or bend the 
    power cord too much.
● Do not twist or pull the power cord.
● If the power cord or plug is damaged, 
    please replace the same type of power 
    cord.

3. Do not touch the power cord and plug 
    with wet hands, otherwise there is a 
    danger of electric shock.
4. Please use the power cord where the 
    water will not splash. Water is in danger 
    of causing fire and electric shock.
5. Never place vases or any other container 
    containing water on this product. Water 
    is dangerous of causing fire and electric 
    shock.
6. Do not allow minors to unplug and touch 
    power lines or connection boards. Minors 
    have no common sense of electricity 
    safety, which may cause electric shock.

SAFETY PRECAUTIONS

17

MY ELECTRONIC DRUM

Summary of Contents for DED-200





















Reviews: