Donner DDP-300, Owner'S Manual

Page: 7 / 28

Key Cover
Piano Assembly
CAUTION:
Ÿ
When opening or closing the key cover, be
careful to move the gap between the part
and the panel to avoid your fingers getting
caught.
Ÿ
Please do not put metal plate or paper on
the key cover because small items may slip
into the piano when the cover is opening. It
may be difficult to get it out and lead to
electric shock, short circuit, fire or terrible
damage to the instrument.
Ÿ
If you need to remove the piano, please be
sure the key cover is closed.
Ÿ
Please do not stress the music stand when
using.
Music Stand
Erect the Music Stand:
1. Pull out the stand completely towards the
front of the piano.
2. Turn down two metal supports on each side
of the rear of the stand.
3. Lean the music stand against the metal
supports.
1
3
2
Put Down the Music Stand:
1. Pull out the stand completely towards the
front of the piano.
2. Flick the metal supports (on the back of the
music stand).
3. Put the stand down lightly.
1
2
3
Do not erect the stand vertically
without certain incline degree.
When put down the stand, please do
not let go of your hands before the
stand is set flat.
1. Open the Key Cover:
Lift the key cover lightly, and push forward
to make it slide to the end.
2.
Close the Key Cover:
Pull the cover back in your direction, and put
it down lightly above the keys.
03
CAUTION: