10
wear, and other damage), (4) damage to or loosening of hinges
and latches, (5) evidence of dropping or abuse.
(c) Before turning on microwave power for any service test or
inspection within the microwave generating compartments,
check the magnetron, wave guide or transmission line, and
cavity for proper alignment, integrity, and connection.
(d) Any defective or misadjusted components in the interlock,
monitor, door seal, and microwave generation and transmission
systems shall be repaired, replaced, or adjusted by procedures
described in this manual before the oven is released to the
owner.
(e) A microwave leakage check to verify compliance with the
Federal Performance Standard should be performed on each
oven prior to release to the owner.
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of an electrical
short circuit, grounding reduces the risk of electric shock by
providing an escape wire for the electric current. This appliance
is equipped with a cord having a grounding wire with a
grounding plug. The plug must be plugged into an outlet that is
properly installed and grounded.
WARNING – Improper use of the grounding can result in a risk
of electric shock. Consult a qualified electrician or serviceman if
the grounding instructions are not completely understood, or if
doubt exists as to whether the appliance is properly grounded,
and either:
1) If it is necessary to use an extension cord, use only a 3-wire
extension cord that has a 3-blade grounding plug, and a 3-slot
receptacle that will accept the plug on the appliance. The
marked rating of the extension cord shall be equal to or greater
than the electrical rating of the appliance, or
2) Do not use an extension cord. If the power supply cord is too
