2Mega HD-SDI Speed Dome Camera User manual
33
PTZ function doesn
’t perform when motion detection is “On”, Motion detection is detected specific
area
’s movement, if the cameras moves Pan, Tilt and zoom, it doesn’t recognize the motion detection
correctly.
■ Set up motion detection
①
"2. SELECT ALARM". Select
“motion”
.
②
"3. MOTION DETECTION" select
"ON" Change to screen for motion detection area set mode by
pressing F/F key.
③
Set motion detection area by joystick
and adjust motion detection area size
by joystick Zoom IN/OUT.
④
Save motion detection setting and
back to previous menu by pressing
“F/F".
Select MOTION DETECTION :
“On” it is displayed “Motion Detected’ message in the screen if motion
is detected in designated motion detection area.
4. ALARM CHANNEL ON/OFF
- Set Alarm input On/Off each channel.
Move motion
detection area
Reduction
motion
detection area
Enlarge
motion
detection area
- SPECIAL SET.
1. OSD DISPLAY
: ID+STATUS
2. SELECT ALARM
:
MOTION
3. MOTION DETECTION
:
ON
4. ALARM CHANNEL ON/OFF.
5. ALARM PRESET SET
6. AUTO REFRESH TIME : 3 Day
7. NEXT MENU PAGE.
8. RETURN TO MAIN PAGE.
PRESS F/F
, AREA OR LINE SET.
- MOTION DETECTION AREA SET.
F/F SAVE, F/N NOT SAVE.
- SPECIAL SET.
1. OSD DISPLAY
: ID+STATUS
2. SELECT ALARM
: SENSOR
3. MOTION DETECTION
: OFF
4. ALARM CHANNEL ON/OFF.
5. ALARM PRESET SET
6. AUTO REFRESH TIME : 3 Day
7. NEXT MENU PAGE.
8. RETURN TO MAIN PAGE.
JOYSTICK U/D/L/R TO SELECT.
- ALARM CHANNEL ON/OFF.
CH 01:
OFF
CH 02: OFF
CH 03:
OFF
CH 04: OFF
ALARM RELAY
: OFF
ACTIVE ALARM
: OPEN
PREVIOUS MENU PAGE.
