2Mega HD-SDI Speed Dome Camera User manual
16
3. DIP switch setting
3.1. DIP
Switch
setting
-
Termination Resistor (DIP S2/SW1):
Turn the last camera on the data line as a switch
to turn on/off the terminal resistor on.
Turn the DIP SW of some of the farthest cameras
on in the case of the data lines distributed to
several directions.
(** The default is off. **)
-Address / Initial Select (DIP S2/SW2):
Set ADDRESS DIP SW in the status of
ADDRESS
(*Reference to next page*)
Set the communication speed (baud rates) and
Protocol (Demand for the technical inquiry) up in
the state of the INITAIL.
(.*** The first default is ADDRESS.**)
-Select PAL / NTSC system (DIP S2/SW 3):
-NC(DIP S2/SW 4):
Not used.
