Dongcheng ADJF22, Operation Instructions Manual, Page: 12 / 44

12
EN
SAW BLADE SELECTION INSTRUCTIONS
Material Picture Usage
BIM
BIM-Metal
Sheet Metal
＜
20mm
Pipe Profile
＜
90mm
(Straight Saw)
High Carbon Steel
HCS-Wood
Wood Board
＜
90mm
Pipe Profile
＜
90mm
(Straight Saw)
For battery tools:
（（（（（（（（
Ambient temperature range during operation and storage: 0
℃
- 45
℃
(32
℉
-113
℉
)
Recommended ambient temperature range during charging: 5
℃
- 40
℃
(41
℉
-104
℉
)
Charger Battery pack
Model FFCL20-02
FFBL2020
FFBL2040
MAINTENANCE AND
INSPECTION
● Inspection:
When the machine is issued or retracted, the custodian
must conduct a daily inspection; before use, the user
must conduct a daily inspection; the unit using the
machine must have a full-time staff to conduct regular
inspections; inspect at least once a year; In areas
with damp heat and frequent temperature changes or
places with harsh operating conditions, the inspection
period should be shortened accordingly; inspections
should be carried out in time before the rainy season.
For machines that have passed regular inspections,
the inspection "qualified" mark should be pasted on
the appropriate parts of the machine. The "qualified"
mark should be clear, clear and correct and include at
least: machine number, inspection unit name or mark,
inspector name or mark, and effective date.
●
Maintenance:
The maintenance of the machine must be carried
out by a maintenance organization approved by the
original manufacturer. The user and maintenance
department shall not arbitrarily modify the original
design parameters of the machine, and shall not
use substitute materials that are lower than the
performance of the raw materials and parts and
components that do not conform to the original
specifications.
CARE AND MAINTENANCE
CAUTION: Always be sure that the tool is switched
off and the battery is removed before attempting
to perform inspection or maintenance.
●
Storage
When you do not need to use the machine for a
long time, please pull out the battery pack. Keep
the battery pack away from metal objects, such
as paper clips, coins, keys, nails, screws or other
small metal objects. These objects may connect
the two terminals of the battery together. Shorting
the battery terminals may cause an explosion or
fire.
● Clean the Vents
Machine vents must be kept clean. It should be
cleaned regularly or whenever there is a blockage.
● Inspecting the Mounting Screws
Regularly inspect all mounting screws and ensure
that they are properly tightened. Should any of
the screws be loose, retighten them immediately.
Failure to do so could result in serious hazard.
●
Cleaning
It is forbidden to use liquids such as water or
chemical cleaning agents to clean the machine,
just wipe it with a dry cloth. Keep the handle dry
and clean to avoid oil and grease pollution.