14
4) After checking the fixed value, press [HOLD] button once again. Then, “HOLD” is
disappeared and the value and bar graph are changed in real time.
1) When the product is turned off on HOLD status, the fixed value is not saved.
2) If measure other objects on HOLD status, the value is not displayed on LCD. Please
measure after releasing HOLD status certainly.
7.7 Automatic Power OFF function [Electrostatic mode/Ion balance mode]
Power is turned off automatically with beep sound if not use for 5 minutes after measuring.
This function can be set by [HOLD] button on main body.
1) This function is the default setting for extension of battery life.
2) If user want to turn off this function, press [HOLD] button over 3 seconds.
Then, Automatic Power OFF function is turned off and it is displayed on LCD as below.
3) If not to use this function, the product keep continuously power-on until user turns off
power. Please note the battery charge status.
4) If user want to reactivate this function, press [HOLD] button over 3 seconds.
Then, blinking of the battery charge status stops and Automatic Power OFF function is
reactivated.
Status
Display
“Automatic Power OFF” on
Not Blinking
“Automatic Power OFF” off
Blinking
1) In case of deactivating Automatic Power OFF function, check the battery charge
status because the product keep power on until user turns off by POWER button.
Battery could be discharged.
2) When turning on the product with deactivating Automatic Power OFF function,
this function is reactivated. If user want to deactivate it, repeat the steps above.
7. Operating Instruction
DONG IL TECHNOLOGY LTD
Warning!!
Warning!!
