01.10.2013
- 6 -
A.
Hydraulic array connected to the tractor;
enables starting and stopping the flow of
the material out of the vessel.
B.
Array controlling band speed;
the part on the left back side when looked at from the
back.
C.
Cover level
;
sets the amount of the material flowing out of the
vessel
. By loosing the lever
handle, you can shift the indicator up down on the table.
It is situated on the back of the
machine.
D.
Spread extent setting;
sets how many meters high fertilizer will be spreaded by the
machine. It has two parts.
First Part:
It is the part first spreading the fertilizer through the band. When you turn the handle in the
middle, angle of the tray changes. On the right side, there are angle levels indicated by
letters such as D,E,F.
When you shift the array N, spreaded material is consantrated in the center of the work
extent.
When you lower the array, and shifted in A direction, spreaded material is disposed in bulks
outside the work extent.
There are small handles on both sides of the handle in the middle. These handles fixe the
wings marked 4-6t. By moving the wings, it is possible to spread the fertilizer close to the
center or the edges of the disc; which affects the width of spreading.
When the wings are moved towards the level 9 ( fertilizer poured to the point close to the
center of disc), then spreading increases the extent of work.
When the wings are moved towards the level 1 (fertilizer poured to the point away from the
center of disc) decreases the width of spreading.
Summary of Contents for W4000
Page 10: ...01 10 2013 9 ...
