01.10.2013
- 4 -
14
15
16
17
18
19
20
1)
Pay attention to shaft.
2)
Power take-off speed is 540 rpm.
3)
Warning! Do not enter between the machine and the tractor.
4)
Check the manual.
5)
Warning! Do not approach manually.
6)
Machine loading/hanging point.
7)
Grease lifting greasing point.
8)
Do not connect trailer to the back of the machine.
9)
Information about shaft.
10)
Wash the machine with clean water upon completion of the work.
11)
Danger of cutting and tearing on the hands and fingers due to the moving
elements.
12)
Danger of crushing of the finger and hand due to accessible moving parts of the
machine.
13)
Danger to be caused by materials or objects spread by the machine.
14)
Danger of falling down or injury for climbing on to the top of moving machine.
15)
Due to the operating and unprotected machine parts
16)
Danger of arm’s or body’s drawing into the machine and injury due to the
operating and unprotected machine parts.
17)
Danger of being crushed under the machine parts.
18)
Touching of high pressured oil on the skin.
19)
Danger of crashing or being crushed on the back of the machine during
connecting or disconnecting the machine.
20)
Maximum allowed hydrolic pressure.
21)
Indicates that machine is in compliance with the valid EU Directive.
6
PORTAGE OF THE MACHINE
During portage, lift the machine by the lifting points shown on the below picture.
Summary of Contents for W4000
Page 10: ...01 10 2013 9 ...