8
Notes for electrical
connection
Strip the insulation off
6 inches
of the
cable.
The unit only operates when power is
supplied and
with the protective
strip connected.
The installation
must be carried out as per VDE 100
[NEC] .
Connection values :
/-10%
50Hz or
/-10%
60Hz or
24VDC +/-10%
Attention: See also name plate
Provide an easily accessible means to
cut off the power.
Only use the PG screwed connection
for an installation with a flexible cable.
Remove the PG screwed connection
when using a hose with a screwed
connection. Screw fittings approved
by VDE or UL are to be used here.
US
Condensate flows through the
condensate inlet
F
and collects in the
collecting area
O.
The membrane is
closed off by the system pressure .
When the moisture sensor detects liquid.
the pressure is released on membrane
P
which then opens, and the condensate is
driven out by the system pressure. The
Membrane closes before air can escape.
Function
In the heater are line resistance are
installed, that gives out heat.
The heat is transfer by the conducted
heater on the aluminium housing.
The control of the heater with
temperature sensors is integrated.
One temperature sensor switches the
heater on when the ambient temperature
is falls under approx.
4
3
°F
.
An other temperature sensor protects the
heater against overheating. The cut-off
temperature is approx.
140°F
.
The packing material and the unit
itself and its accessories are
produced from recyclable materials.
Separating the remaining materials in
an appropriate way helps in the
recycling of materials .
Protection of the
enviroment
