Trunk 2000, T-2000
14
Dust Disposal
Standard Bottom Unit
1. Open the filter-access covers and remove the filter
cartridges. See Filter Removal and Installation.
2. Remove the dust with a dry sweeper or brush and
dispose of properly.
3. Replace filters and close filter-access covers
securely. See Filter Removal and Installation.
4. Turn electrical power and compressed air supply ON
before starting unit.
Hopper Bottom Unit
1. Open the filter-access covers and remove the filter
cartridges. See Filter Removal and Installation.
2. Sweep or brush hopper walls.
3. Replace filters and close filter-access covers
securely. See Filter Removal and Installation.
4. Remove the dustpans and dispose of dust properly.
Empty and clean the dust pans every other day in
heavy dust-load applications, and every week in
light-to-medium applications.
Full dust pans can weigh up to
45-lbs. Use care when removing.
5. Inspect the gasket for wear that could cause a leak
during operation. Replace if necessary.
6. Clean the baffle with a dry brush or dry putty knife.
7. Inspect the draw latches for breaks, deformities, or
wear and replace as necessary.
8. Reinstall the dust pans.
9. Turn electrical power and compressed air supply ON
before starting unit.
