Donaldson standard, Manual

Page: 10 / 36

5.1 General hints
The unit operates only when
power is applied, and with
grounding connection wire
connected.
Make sure that power can be cut-off
easily.
Disconnecting of the power supply should
be done by pulling the electrical mains
plug.
The power cord is installed solidly at
the device.
The connection should be done to an
electrical outlet near the unit res. an outlet
that has to be installed near the unit.
Use circuits with maximum 10 A.
Power Supply:
110 - 230 V AC, 50 - 60 Hz
The installation has to be done
by a trained electrician.
Only use the enclosed plastic screw and
accessories.
Connection via two conductor cable,
any polarity, potential free contact
(fig. 13, contact opens at alarm).
Connect on terminal 3 and Ground
Connection on unit, slot B
Connection for programmer
Connection on unit, slot B
5 Hints for electrical
connection
5.2 Alarm connection
(Superplus version only)
5.3 Info channel
(Superplus version only)
US
10
3
Alarm
Alarm