Safety Instructions
#
Warning and Information labels
The following listing details labels used on your DL250 unit.
Goggles, Gloves & Mask Label
Location: On the filter tray
Meaning: Goggles, Gloves and Masks should be worn while
handling used filters.
Electrical Danger
Location: Lower Side next to base screws
Meaning: Removal of panels with this label attached will
allow access to potentially live components.
Warning Label
Location: Upper Side next to latches.
Meaning: Power should be isolated before the panel with
this label attached is opened/ removed.
Serial Number Label
Location: Lower Rear of unit above mains inlet.
Meaning: This label contains a variety of information about
the extraction unit, including.
•
Company name
•
Extractor model
•
Unit serial number
•
Operating voltage range
•
Maximum current load
•
Operating frequency
•
Relevant approval markings/ logos
PLEASE NOTE:
If the equipment is used in a manner not
specified by the manufacturer, the protection provided by
the equipment maybe compromised.
Fire Risk Warning
In the very rare event that a burning ember or spark is drawn
into the fume extraction unit, it may be possible that the
filters will ignite.
Whilst any resultant fire would typically be retained within
the fume extraction unit, the damage to the extractor would
be significant.
It is therefore essential to minimise this risk by undertaking
an appropriate assessment to determine:-
a). Whether additional fire protection equipment should be
installed.
b). Appropriate maintenance procedures to prevent the risk
of build-up of debris which could potentially combust.
This unit should not be used on processes with sparks of
flammable materials or with explosive dusts and gases,
without implementation of additional precautions.
It is essential that nozzles or other extraction/fume
capture devices and hoses/pipework are cleaned regularly
to prevent the build-up of potentially ignitable debris.
02
2
