Replacement Parts
Consumable Spares
The AD Nano extraction system contains two filters. These
should be replaced when instructed to do so by the AD
Nano system (see section
6
for replacing the filters)
To maintain performance it is important that the filters are
replaced with identical BOFA filters. To re-order please refer
to the Filter number printed on the filter installed in your
extraction unit.
Maintenance Protocol
Users can record changes in filter change intervals on the
table below.
Filter disposal
The AD Nano Combined filter is manufactured from non-
toxic materials. Filters are not re-usable, cleaning used
filters is not recommended. The method of disposal of the
used filters depends on the material deposited on them.
For your guidance
Deposit
EWC
Listing*
Comment
Non
Hazardous
15 02 03
Can be disposed of as non-
hazardous waste.
Hazardous 15 02 02M
The type of hazard needs to
be identified and the
associated risks defined.
The thresholds for these
risks can then be compared
with the amount of material
in the filters to see if they
fall into the hazardous
category, if so, the filters
will need to be disposed of
in line with the
local/national regulations.
*European Waste Catalogue
Unit Serial Number:
Pre Filter
Date
Engineer
Unit Serial Number:
Combined Filter
Date
Engineer
01
7
