Downflo Oval, DFO 2-8 to 4-128
32
Platforms and Ladders
Stationary platforms are available for use on single
to eleven module, two filter wide collectors and three
module, three filter wide collectors.
For two filter wide collectors the platform is available for
standard or steep-sided hoppers with the ladder located
left, right, or front of the platform.
On three filter wide collectors the platform is available
for standard hoppers only with ladder access on the left
or right side only. Complete installation and assembly
instructions are shipped with the platform.
Dropping the platform can result
in personal injury or property
damage. Secure the platform assembly to the
crane or forklift with straps or clamps.
Stationary Platform
1. Pre-assemble the platform according to the
instructions shipped with the platform. The hardware
and placement is called out on the assembly
drawing.
2. Lift the assembled platform into position and secure
following the assembly drawing instructions.
3. Tighten all hardware before removing crane or
forklift.
4. Check platform hardware each time the platform is
used.
platform weld
safety bar
brace
ladder
Stationary Platform
