11
E
N
G
L
I
S
H
COMPUTER ST 270
FUNCTIONS:
SCAN:
automatically and sequentially displays each function every six function.
TIME:
Displays the time up to 99:59 mn.
CAL:
Calculates the estimated loss of calories, values determined for average work rate and an average body and strength.
Do not use for therapeutic reasons.
STRIDE/MIN:
Counts the number of steps per minute
COUNT:
Calculates the number of steps since the first training.
INSTALLING OR REPLACING THE BATTERY :
• Remove the computer mechanism removing it from its space.
• Install or replace 1.5V UM3 or AA batteries checking the polarity on the drawings below.
• Replace the counter
• If however, the information is not or only
partially displayed, remove the battery, wait 15
seconds and replace it.
• Display values are systematically reset if you
remove the battery.
• If you do not use the counter for a long period,
remove the battery to avoid causing damage by
oxidising the contacts.
• To protect the environment, return used batteries
to a collection point.
NOTE :
1. No information displayed on the counter: Make
sure the polarity is correct/your batteries are
perhaps worn out, change them.
2. The counter at the functions are at zero: Check the connector is properly inserted into the plug the back of the counter.
PRECAUTIONS
:
- Do not expose to sunlight.
- Avoid contact with water.
Warning: the calculation of calories burnt is an estimation and should not be taken as medical information.
We recommend you consult your doctor or dietician to adapt your food and energy
intake to your physical condition and sports activities.
Recycling:
The ‘crossed out dustbin’ sign means that this product and its batteries cannot be
thrown out with domestic waste. They should be treated apart. When you have
finished with them, drop them at an authorised collection point so they can be
recycled. This gesture will go towards protecting the environment and your health.
GETTING STARTED:
Press the button until the function that you want to use appears.
Note: press the button for three seconds to reset the counter before each
exercise.
To activate the system, press the button on the display or start exerci-
sing.
The system will switch automatically to standby mode after four minutes
if no movement is detected.
