DOMUSA HTP 100-150, Installation And Operating Instructions Manual

Page: 15 / 24

13 13 13 13
6
66
6 TECHNICAL CHARACTERI
TECHNICAL CHARACTERI TECHNICAL CHARACTERI
TECHNICAL CHARACTERISTICS
STICS STICS
STICS
MODEL MODEL MODEL MODEL HTP 10 HTP 10 HTP 10 HTP 100 00 0----150 150 150 150 HTP 130 HTP 130 HTP 130 HTP 130----200 200 200 200
DHW total volume L 100 130
Pellet storage capacity Kg 150 200
Max. working pressure of tank bar 7
Max. storage temperature ºC 80
Max. primary temperature ºC 85
Max. primary working pressure bar 3
Weight empty Kg. 90 110
Weight full Kg. 340 440
Continuous flow L/h
∆
30 ºC
Q
p
1m
3
/h 683 733
Peak flow L/10min
∆
30 ºC
Q
p
1m
3
/h 252 302
Domestic hot water test operating conditions:
−
Boiler power: 25 kW
−
Domestic water inlet temperature: 15°C,
−
DHW temperature: 45°C,
−
Primary hot water temperature: 80°C,
−
Storage temperature: 60°C
7 77 7 CIRCULATING PUMP STA CIRCULATING PUMP STA CIRCULATING PUMP STA CIRCULATING PUMP STATUS CODE TUS CODE TUS CODE TUS CODES SS S
The high efficiency pumps of the HTP HTP HTP HTP deposit tanks include a Led (light) which displays their status.
PUMP PUMP PUMP PUMP
LIGHT
LIGHT LIGHT LIGHT
DESCRIPTION DESCRIPTION DESCRIPTION DESCRIPTION STATUS STATUS STATUS STATUS CAUSE CAUSE CAUSE CAUSE SOLUTION SOLUTION SOLUTION SOLUTION
It is lit green
The pump is
functioning The pump operates
according to its
setting Standard functioning
1. Low voltage
U<160 V
or
Excess voltage
U>253 V 1. Check the
power
supply
195 V<U<253 V
It flashes
red/green
The is ready for
service but is not
functioning
The pump will start
up again
automatically once
the error has been
solved
2. Excess temperature
of the module: the
temperature of the
motor is too
high 2. Check the
room
temperature and that
of the fluid
Flashes red
The pump is out of
order The pump is stopped
(blocked)
The pump does not start
up automatically. Change the pump. Please
contact your nearest
official technical
assistance service to have
it replaced
1. The pump is not
connected to the power
supply 1. Check the
connection of the cable
2. The LED is faulty 2. Check if
the pump works
Light off
There is no power
supply
The electrical system
is not receiving
power supply
3. The electrical system is
faulty 3. Change the
Pump. Change the
pump. Please contact
your nearest official
technical assistance
service to have it replaced