DOMUSA TEKNIK Evolution Solar 30 HDX Installation And Operating Instructions Manual Download | Manualshive

Page: 24 / 60

background image

Evolution Solar HDX

22

7.3

Selecting the DHW setpoint temperature in the solar hot water tank



The temperature of the DHW in the solar hot water tank is selected by using the MODE touch

button to browse to the "

Solar hot water tank DHW setpoint temperature

" viewing option. When

this option appears on the display, select the desired temperature by touching the "+" and "-"

symbols to increase or decrease the temperature. The DHW setpoint temperature range that may

be selected for the solar hot water tank is 10 - 80ºC.

7.4

Selecting the underfloor heating flow setpoint temperature (with SRX2/EV kit option)



If the boiler is supplied with an optional SRX2/EV underfloor heating kit integrated, the desired flow

temperature of the installation can be selected using the touch button as shown in the figure
above. To select the desired temperature, touch the "

+

" or "

-

" symbols to increase or decrease the

temperature. When the temperature has been selected, the display will return to standby mode

after a few seconds.

The installation flow setpoint temperature can also be selected by using the MODE touch button to

browse to the “

underfloor heating installation flow setpoint

" display option. When this option

appears on the display, touch the "+ /-" symbols to select the desired temperature.

If you wish to disable the underfloor heating circuit function, select the setpoint value "

OFF

" by

touching the "-" symbol until this value appears on the display.

The flow setpoint temperature range permitted is OFF and 0 - 45ºC. To obtain optimum

performance from the underfloor heating system installed, we recommend selecting a setpoint

temperature of 25 - 35 ºC, providing this is permitted by the heating system installed and the

insulation in your home.

«
...
22
23
24
25
26
...
»

Summary of Contents for Evolution Solar 30 HDX





























































Reviews:

No comments

Related manuals for Evolution Solar 30 HDX

Brand: IBC Pages: 124

Brand: Raypak Pages: 2

Brand: MIKOTERM Pages: 38

Brand: Unical Pages: 40

Brand: Unical Pages: 36

Brand: Viessmann Pages: 52

Brand: Biasi Pages: 84

Brand: Laars Pages: 138

Brand: IBC Technologies Pages: 80

Brand: DeDietrich Pages: 20

Alpha 500E (LPG)

Brand: Alpha Pages: 4

Brand: Unical Pages: 52

Brand: Unical Pages: 72

Brand: Unical Pages: 80

Brand: Enerzone Pages: 24

Brand: Baxi Pages: 20

Brand: kunzel Pages: 32

Brand: HTP Pages: 66

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands