background image

BT DUO HE 

 

1

 

SECURITY WARNINGS 

The hydraulic installation should be carried out by qualified personnel, in compliance with the current 
installation regulations. 

All interventions in the system must be carried out by a Technical Assistance Service authorized by 

DOMUSA TEKNIK

, since any modification to its configuration may cause operating errors and serious 

damage.  

This device can be used by children aged 8 years and above and people with reduced physical, sensory 
or mental abilities or lack of experience and knowledge, provided that they have been given 
appropriate supervision or training regarding the use of the device in a safe manner and the dangers 
involved. Children should not play with the appliance. The cleaning and maintenance to be performed 
by the user should not be carried out by children without supervision. 

1.1

 

Freeze Protection 

Precautions should be taken against possible frost, in order to avoid damage to the installation. It is 
advisable to add antifreeze to the water in the tank which should be compatible with public hygiene 
standards and must not be toxic. 

DOMUSA TEKNIK

 recommends the use of propylene glycol. Please 

contact the manufacturer of the product before use. 

For long periods of stoppage of the installation, all 

water in the tank should be emptied

1.2

 

Water Characteristics 

The domestic water should comply with the characteristics defined in the Technical Code of the 
Building . Otherwise, it should be treated. 

In addition, it should comply with Directive 98/83/EC on the quality of water intended for human 
consumption. Special attention should be paid to the following parameters: 

- Maximum chloride concentration: 250 mg/l. 

- Maximum sulphate concentration: 250 mg/l. 

- Sum of maximum chloride and sulphate concentration: 300 mg/l. 

- Maximum conductivity: 600 μS/cm. 

When the chloride concentration in the Domestic Water is higher than 250 mg/l, it is advisable to 
install an anti-corrosion protection in the interior of the tank, preventing the premature deterioration 
of it. 

DOMUSA TEKNIK

 provides as an option an electronic cathodic protection suitable for its line 

of 

BT TRIO

 buffer tanks. For installation, carefully read the installation instructions supplied with it. 

Summary of Contents for BT DUO HE HE 180/60













Reviews: