29-31 Richland St. Kingsgrove. Sydney NSW 2208 Australia
Phone: 02 9554 9600 | Fax: 02 9554 9433
[email protected] | www.domuslighting.com
Installation Manual
Note: The Ceiling Fan must be installed by a licensed Electrician. Ensure the power is switched off before fitting this ceiling fan.
For any questions, please call Domus® on (02) 9554 9600, Monday to Friday 9am – 5pm EST.
AC
BLUE
BROWN
TO FAN/LIGHT/NEUTRAL
BLUE
TO FAN/LIVE
BROWN
TO LIGHT/LIVE
RED
FAN MOTOR
RF ANT
1 2 3 4
- 1.5v AAA
+
- 1.5v AAA
+
RF ANT
CODE SWITCH
RF ANT
BLUE
(Mains/Neutral)
BROWN
(Mains/Live)
BROWN
(Fan/Live)
AC POWER SUPPLY
RED
(Light/Live)
BLUE
(Fan/Neutral)
1. For fans that are not drop rod styles (i.e. Flush Mount Styles) the appropriate conversion kit should be used. The
fan should be installed and hanging from the ceiling. It has been design as a plug and play system, but to ensure
correct operarion wiring instructions are provided.
2. Make the wiring connection as shown in the illustration below. RF. sensor must be stuck outside canopy. Its
position depends on the RF. receiving condition.
3. Once the connection has been made, the receiver inserts into the drop rod hanging bracket. The canopy comes
up to cover the receiver and bracket.
4. To change the batteries is to open the battery housing cover by sliding down the cover in the direction of the
arrow.
5. Use the screws provided to install the transmitter holder.
