29-31 Richland St. Kingsgrove. Sydney NSW 2208 Australia
Phone: 02 9554 9600 | Fax: 02 9554 9433
[email protected] | www.domuslighting.com
Installation Manual
Note:
-The lamp must be installed by professional electrician
-Ensure the power supply is switched off before fitting this product
-Do not touch the lamp when in use
-Keep away from hot steam and corrosive gas
Specifications
Input Voltage:
12-24VDC
Load Current:
1x8A
Max Load Power: 1x(96-192W)
DALI voltage:
Typical-16V,
Maximum-22.5V
DALI current:
˂=2mA
Working Temp:
-20
°
-+50
°
Load Type:
0.04-0.1W LED
DALI dimming parameters (factory default)
Minimum dimming value:
0.1%
Maximum dimming value:
100%
Fade Time:
0
Fade Time:
7
CHAM-23
Order Code
Product Code
Description
20132
CHAM-23
DALI push dimmer
The CHAMELEON-23 series DALI push dimmer is a highly reliable product with excellent performance. it can be
used in PUSH DIMMER mode or addressed to suit a DALI system.
Function features:
1.
Getting standard DALI signal control interface and perfect compatibility. DALI push dimmer can integrate into
any other companies DALI system.
2.
DALI address can be automatically assigned via the DALI master controller or it can be manually addressed.
With this flexibility, it greatly reduces the difficulty of project installations.
3.
DALI address is very intuitive by the digital display located on the front of the controller. There is no need to
test each address one by one to determine the correct one. This saves a lot ohime in project installations.
4.
Manual settings are made easy by the digital display and micro push buttons located underneath the display.
5.
DALI push dimmer only gets standard DALI dimming functions but it’s also compatible with PUSH DIMMER
functions. At the same signal port (Dl and D2) it can import DALI signal to dim the lights or can be used in (Pd)
mode through a 200-240VAC voltage input switch (momentary). This can be used in traditional wall mounted
switch plates to control LED constant voltage lighting systems.
6.
The Chameleon23 can be used in conjunction with the power data repeater (Chameleon 05) to extend its
output.
168mm
56mm
28mm
Dimensions:
