INSTALLATION MANUAL
EN
ORBIT TW
(Tunable White) models refer to the configurations of the
devices that have a built-in LED source with dynamic light colour
adjustment. For correct operation of
ORBIT TW
devices they must be
connected exclusively to an adjustment system supplied by DOMUS Line
such as MAGIC BOX, MAGIC TUNE, TOUCH TW, etc., sold separately. For
more detailed information on DOMUS Line Tunable White adjustment
system characteristics and models go to www.domusline.com or contact us.
All
ORBIT
models can also be fitted with hardware for surface installation.
The
SP
configuration refers to the devices with symmetrical surface
support. The
ML
configuration refers to devices for for flush mount
installation on 0.7 mm thick (min.) metal surfaces.
FLUSH INSTALLATION ON WOOD PANELS
ORBIT collection
devices can be flush mounted either on a pass-through
hole or on a closed-end hole in wood panels.
The installation can be carried out with the light power supply cable in both
an axial or radial position with respect to the installation surface. In the
event of a specific requirement a power wire exit hole can nevertheless be
drilled in other positions as long as it does not compromise the integrity of
the wire and/or the connector installed on it.
- To flush mount the device, bore a ø 68mm hole
≥
18mm deep on the
installation surface and then, if necessary, bore a ø
≥
8mm exit hole for
the power supply cable as illustrated in figure 1.
¹ This installation manual contains instructions valid for all configurations
of ORBIT device
WARNING
Safety is guaranteed if these instructions are followed and therefore they
must be kept. Installation may require the involvement of qualified
personnel. Before proceeding with installation of the device, ensure that
the environmental conditions are in conformity with and suitable for the
characteristics of the product. Before any operation on the device
disconnect mains power.
DESCRIPTION:
Smd LED recessed spotlight: Ideal for creating light points by obtaining a
wide and uniform illumination thanks to the ability to direct the beam at an
angle of +/- 20 °
CONFIGURATIONS
The installation and operation instructions in this manual are valid for all
configurations of the
ORBIT
device, between which there are some
differences.
ORBIT
(Plug & Play) models refer to the configurations of the
devices that have a built-in disconnectable power cable. The
ORBIT
IP44
models refer to the configurations of the splash-proof devices.
