PSS5000/TEMA/803046/14
79 of 155
PSS 5000 – Technical Manual
7 Reset (Menu 4)
7
Reset (Menu 4)
Overview of Reset menu
The
Reset
menu is divided into the following sub-menus:
•
‘7.1 Soft Reset (Menu 4.1)’ on page 79
•
‘7.2 Master Reset (Menu 4.2)’ on page 80
•
‘7.3 Super Master Reset (Menu 4.3)’ on page 81
7.1
Soft Reset (Menu 4.1)
Description of Soft Reset
Activating the Soft Reset will have the same effect as a short power off. The
system stops for a short period and the hardware and communication drivers
are re-initialized, but the state of the operation starts from where it was
stopped.
Note:
When a Soft Reset or power down occurs, the contents of the virtual file
system
pss_mem/4
is cleared.
To make a soft reset with
web service pages
This procedure describes how to use the Service Menu in the web browser to
make a soft reset.
1.
Select
4 Reset
4.1 Soft Reset
.
The
Reset
page appears.
2.
Click
RESET
.
The hardware and communication drivers are re-initialized and the soft-
ware continues from where is was stopped.
To make a soft reset with
local service panel
This procedure describes how to use the Local Service Panel to make a soft
reset.
1.
Press
to move to the
INFORMATION 1
menu.
2.
Press , , ,
to
move
to
the
SOFT RESET 4.1
menu.
