PSS5000/TEMA/803046/14
PSS 5000 – Technical Manual
7 Reset (Menu 4)
3.
Press
to select the
SOFT RESET?
menu.
4.
Use the
and
buttons to toggle between
YES
and
NO
.
5.
Select
YES
and press
OK
.
The system performs a soft reset.
7.2
Master Reset (Menu 4.2)
Description of a master
reset
A Master Reset will, in general, clear the configuration data for the Applica-
tion, for example, the configuration data for Fuelling Points and Tank Gauges.
Some specific parameters, such as protocol to port assignments, IP address and
the like, are not cleared by a Master Reset.
Note:
When a Master Reset occurs, the contents of the virtual file system
pss_mem/4
and
pss_mem/3
are cleared.
To make a master reset
with web service pages
This procedure describes how to use the Service Menu in the web browser to
make a Master Reset.
1.
Select
4 Reset
4.2 Master Reset
.
The
Master Reset
page appears.
2.
Select
Yes, I want to perform a master reset
to confirm your actions.
3.
Click
MASTER RESET
.
The application configuration data is cleared.
To make a master reset
with local service panel
This procedure describes how to use the Local Service Panel to make a Master
Reset.
1.
Press
to move to the
INFORMATION 1
menu.
2.
Press , , , ,
to
move
to
the
MASTER RESET 4.2
menu.
