Instruction manual
6
MINCING MEAT
1.
Cut all foods into pieces (Sinewless,
boneless and fatless meat is
recommended, approximate size:
(20x20 mm) so that they fit easily into
the hopper opening.
2.
Plug in and turn the switch to the
“ON”position.
3.
Feed foods into the hopper plate. Use
only the food pusher (fig.7).
4.
After use switch the unit off and
unplug it from the power supply.
REVERSE FUNCTION
1.
In case of jamming switch the appliance off by turning the switch to “REV” position. Wait at least
one minute until grinder has come to a complete stop.
Then, turn the switch to “REV” position.
2.
Feed screw will be rotating in the opposite direction, and the head will get empty.
3.
If it doesn't work, switch the unit off and clean it.
MAKING KEBBE
1.
Place kibbe attachments (picture 15 on
main description) onto the feed screw
shaft together, fitting protrusions in
the slots (fig.8).
