DO9043W
FUNCTION BUTTONS
1. On & off switch. (ON-OFF)
2. The crispy button. (CRISP) With
the crispy button you can adjust the
amount of crispiness of the wafer.
Press the button in and the button’s
indicator light will automatically
light up. By pressing the button once
again the function will be reset to
the normal mode. This button is for
use after the preheating phase and
before u begin baking.
3. Time switch. (TIME) Adjust
baking time manually, from
minimum 1 to maximum 4 minutes
with a 30 second interval. The standard baking time begins at 2:00. This button is for
use after the preheating phase and before you begin baking.
4. Stop button. (STOP) Use this to stop the baking process manually.
5. Starting button. (START) Start the baking time. This is to be used after preheating
or any possible manual adjustment of the baking time.
INSTRUCTIONS FOR USE
After you have connected the appliance and turned the switch ‘ON’, the display will
light up, showing “2:00”. This is the pre-set baking time. If the baking tray is not
placed in the correct position the appliance will correct this automatically before the
baking tray is heated.
At the end of the preheating phase, if the baking tray has reached the correct
temperature, the ‘READY light will go on and you will hear an acoustic signal
4-times.
Only the ON/OFF button will work during the preheating phase.
Normal Mode
Switch the appliance ‘ON’. After the preheating phase you will see the time indicator
(TIME) light up on the display. The Crispy option (CRISP) is not selected.
The time is indicated according to the following cycle: 2:00 – 2:30 – 3:00 – 4:00 –
1:00 – 1:30.
If you use the pre-set baking time of 2 minutes or have set the desired time length,
press on (START). After 10 seconds the baking tray will start to rotate and baking
will begin. Meanwhile the time you set will run back to 0:00. After baking time has
finished you will hear an acoustic signal and see the previous baking time settings on
the display. The (Ready) light will switch on.
20
1
2 3 4
5
Summary of Contents for DO9043W
Page 25: ...DO9043W 25...
