![background image](http://html1.mh-extra.com/html/domo/do191a/do191a_instruction-booklet_2519816031.webp)
DO-191A
Pull the air outlet pipe apart by pulling on both ends.
Screw the air outlet pipe to the square-shaped appliance connector.
Screw the other end of the air outlet pipe into the round wall connection
fitting.
Connect the square appliance connector to the air conditioner
.
AUTOMATIC SAFETY FUNCTION
The automatic safety function can switch the appliance off if any of the
following takes place:
Cooling
Indoor temperature rises above 43°C
Room temperature is below 15°C
Dehumidify
Room temperature is below 15°C
If your appliance is set to Cool or Dehumidify and the window remains open for a
considerable length of time and the relative atmospheric humidity is above 80%,
liquid may run out of the water outlet.
Applicability of the Safety Function
If the appliance is restarted immediately after it is switched off the automatic safety
function will not allow the appliance to work immediately. Always wait for 3 minutes
before restarting the appliance. If you remove the plug from the socket, the appliance
rests itself to the original settings. The ‘Timer on’ and ‘Timer off’ settings must be
readjusted.
DRAINAGE
The appliance has a receptacle (container) for collecting water for recycling.
MAINTENANCE
Switch the appliance off before you remove the plug from the socket. Clean the
appliance with a soft, dry cloth. If the appliance is very dirty use lukewarm water
(colder than 40°C) to clean it. Never use volatile or abrasive cleaning products. Never
spray water onto the outside casing.
Cleaning the Air Filter
Switch the appliance off and unscrew the air filter’s locking system by a half turn
31