Domo DO-429K, Instruction Booklet, Page: 70 / 74

DO-429K
the coffee making element. After using 50 litre of water the display will remind you
to repalce the water filter
. If you want to continu to use the appliance without
replacing the water filter press to return to the main menu.After a couple of cups
the appliance will reremind you to replace the water filter. To replace the water filter,
press Menu
. Remove the water tank and the filter, and place a new one. Replace
the water tank. Push , the appliance will return to the main menu. Immersing the
water filter a couple of minutes in clear tap water before installing, will produce an
even beter filter result. Replacement of the water filter is recommended after using
50 litre of water or every two months. If you do not use the appliance for a couple of
weeks we recommend to replace the water filter. Follow below procedure to restart
the counting of water usage after replacing the filter cartridge.
1. Switch on the appliance
2. Press the Menu button
., than press seven times until the display shows
.
3. Press the Menu button again, the display will show to remind to
replace the filter.
4. Replace the filter, press and confirm by pressing the blinking icon
5. Press ,to return to the main display.
DESCALING
Please remove the water filter before descaling.
In order to prolong the life of your appliance it is recommended that you descale it
regularly. Your appliance indicates when it needs to be descaling, this icon
will
be shown on the display. Dissolve the descaling product provided (1 sachet) in 800ml
of water. Make sure that the device has cooled completely. Fill the reservoir with the
descaling solution. Put a container able to hold at least 1.5 litres under the nozzle.
Press on the ON/OFF button . The display will show and a small amount of
water will be released from the nozzle to remove any remaining residue.
If automatic flushing is finished, the display will show the following:
.The
following buttons will also be illuminated.
70