(26)
EPT052026 Issue 1 February 2019
Set random jet
^1P01CS
*x*y
\0
*x
=0: Disable random jet.
*x
=1: Enable random jet.
*y
: Set the delay time in
seconds. Range = 00001-
36000 (mandatory 5
characters).
^1P01CS100060\0 = Enable
random jet. Purge the print head
every 60 seconds.
Purge print head
^1G01CS\0
^1G01CS\0 = Immediately
purge the print head.
Reset counter
^1R02CS0\0
^1G01CS\0 = Reset the counter
when printing stops.
Set font type
^1u02CS
*x
\0
*x
=0: Normal font.
*x
=1: Uppercase font.
^1U02CS0\0 = Set normal font.
^1U02CS1\0 = Set uppercase
font.
This command is acted on after
the “set message” command is
received.
Set font size
^1U01CS
*x
\0
*x
=0: 1 line font height.
*x
=1: 2 line font height.
*x
=2: 3 line font height.
*x
=3: 4 line font height.
*x
=4: 5 line font height.
*x
=5: 6 line font height.
^1U01CS0\0 = Set font height
to 1 line.
^1U01CS5\0 = Set font height
to 6 lines.
This command is acted on after
the “set message” command is
received.
Table 2: PLC to Printer
Operation
Command
Parameter
Examples
