Dominator Select
Instruction Manual
8
10. Optional Safety Beam Kit
10.1 Safety Beams
The Safety Beam Kit provides additional safety by preventing the door closing
when the beam is blocked by a car, child etc. When the Safety Beam Kit is
installed the Auto-close feature can be enabled if required.
a. To install the Safety Beam Kit, refer to the Safety Beam instruction supplied
with the kit.
b. After the beams are installed the beam alignment feature of the opener
can be used.
c. Turn power on to the opener.
d. Align the safety beams using the main light as a guide:
i. bright = aligned
ii. dull = not aligned or blocked
When the beam is aligned or if no beam is fitted, continue with Setting Limits.
11. Specifications
Technical Specifications
Select
DSO-1
Rated voltage range:
230V - 240Va.c.
Rated frequency:
50Hz / 60Hz
Rated power input:
165W
Door opening:
Maximum Door Area:
Maximum Door Weight:
Door must be well balanced and able to be operated by
hand, as per warranty conditions and AS/NZS 4505:2012
15m
2
140kg*
Minimum headroom
57mm
Rated Operating Time
4 mins
Rated Temp
+5
o
C to +40
o
C
Short Term Peak force:
700N
Door travel speed (mm/sec)
140mm
Rated load
400N
Nominal force
200N (20kg)
Receiver type
Multi-frequency UHF FM
Receiver code storage capacity
64 X 4-button Transmitters
Transmitter battery
CR2032 (3 Volts)
Courtesy light
LED (Light Emitting Diodes)
Network connectivity
Network ready
(requires optional smart phone control kit)
* Gross door weight, including all fittings
Note: During the open and close cycles, intermittent operations may occur in areas which experience very strong
winds. The strong wind puts extra pressure on the door and tracks which may in turn intermittently trigger the safety
obstruction detection system.
