- 17 -
INSTALLING THE WINE CELLAR
fREE-STANdING INSTALLATION
To install the wine cellar, follow these steps:
Place the wine cellar on a strong and
level floor and verify that the door can be
opened wide enough to allow the shelves
to be pulled out.
Adjust the feet to allow a 0 mm clear-
ance under the wine cellar.
Check that the appliance is absolutely
level. It can be levelled by screwing the
adjustable feet at the front of the appliance
up or down.
Connect to electrical outlet. Secure the
cord behind the unit.
BUILT-IN INSTALLATION
To install the wine cellar, follow these steps:
Mount the appliance in the enclosure.
Check for necessary clearance. (Above
clearance should be 50 mm.)
Adjust the feet to allow a 0 mm clear-
ance under the wine cellar.
Check that the appliance is absolutely
level. It can be levelled by screwing the
adjustable feet at the front of the appliance
up or down.
Connect to electrical outlet. Secure the
cord behind the unit.
1.
2.
.
.
1.
2.
.
.
INSTALLATION INSTRUCTIONS
MOUNTING THE dOOR HANdLE
To mount the door handle, follow these steps:
Remove the door gasket behind the two
holes adapted for the handle. Start in the
upper corner and gently pull out the gas-
ket from the slot. Continue down and pass
the two holes.
Insert the two screws in the two pre-
drilled holes.
Mount the handle. Secure with the two
provided screws.
1.
2.
.
