6
EN
Toilets
3.3 Understanding the indicator lights for the 9000 series
Indicator
Light
Status
Power on
Green
Electrical power to the toilet is
activated
Tank level
Amber
The holding tank is 75% full
Red
The holding tank is 100% full*
*Flush actuation is disabled to prevent overfilling of the holding tank.
3.4 Using the automatic “full tank” shut-down function
When connected to a holding tank level indication system, the RushFlush toilet system control
module disables flush functionality when the holding tank level reaches the “full” mark.
➤
Empty the holding tank to restore flush functionality.
3.5 Adjusting the water consumption settings
To optimize toilet performance and operation, adjust the water control module to set the rate of
water flow for the upper rim and lower bowl jet. This adjustment should occur during installation.
Refer to the 9000 Series Installation Manual for more detail.
3.6 Initializing the toilet system
➤
Turn on the water supply and electrical power to the toilet.
➤
Press the
Flush
handle or switch once.
➤
Toss several sheets of toilet tissue into the bowl and flush the toilet again.
I
If the toilet does not function as expected, refer to “5 Troubleshooting” on page 9
for possible solutions.
