Dometic RUA 6408X, Installation Manual

Page: 21 / 32

RUA5208X, RUA6408X, RUA8408X Installing the refrigerator
EN
21
Install the flue duct as follows:
1. Make a rectangular opening in the outer wall of the vehicle (fig.
k
, page 21).
– The opening must be as wide as the flue pipe (fig.
j
3, page 20).
– The opening must be high enough that the flue pipe fits through at a 45° angle.
2. Insert the coil (fig.
j
7, page 20) in the flue pipe (fig.
j
8, page 20) of the refrigerator.
3. Place the T-piece (fig.
j
4, page 20) on the adaptor (fig.
j
5, page 20) and the flue pipe
(fig.
j
8, page 20) of the refrigerator.
4. Direct the T-piece at an angle of 45° towards the rear wall.
5. Attach the T-piece, adaptor and flue pipe with a screw (fig.
j
6, page 20).
6. Install the mounting plate (fig.
l
, page 21).
7. Fill the opening with fire-resistant material (e.g. stone wool (fig.
l
, page 21).
I
8. Slide the flue pipe at least 15 mm on the T-piece (fig.
l
, page 21).
NOTE
In some installation situations, it is possible that the flue pipe would extend too far out
of the vehicle in its installed state. Shorten the flue pipe to the correct length if neces-
sary.
1.
2.
k
min.
15 mm
1.
2.
3.
l
DometicRUA5208X6408X8408X_INM_4445102444_APAC(en)_xxxx-xx-xx.book Seite 21 Montag, 15.