Dometic Rollerblind PrecisionRise, Installation And Operating Manual

Page: 9 / 132

EN
Rollerblind PrecisionRise Troubleshooting
9
➤
Fully deploy the blind to clean the fabric.
➤
Fully stow the blind to clean around guide wires.
Spot cleaning
➤
Spot-clean with a soft white cloth, moistened with warm water. Add a mild deter-
gent if needed (non-abrasive and with no additives).
➤
Blot gently to avoid creasing or damaging the fabric. Always leave the blind
deployed to dry thoroughly.
Cleaning windows
➤
Always ensure your blinds are fully stowed before cleaning windows. This will
prevent spoiling the blind fabric by splatter or sprays of water or detergent.
9 Troubleshooting
10 Warranty
The statutory warranty period applies. If the product is defective, please contact your
retailer or the manufacturer's branch in your country (see dometic.com/dealer).
For repair and warranty processing, please include the following documents when
you send in the product:
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
Fault Solution
Guide wire tension too low
➤
See chapter “Fitting the guide wire versions” on
page 7.
Guide wire too short
➤
Order replacement guide wire, see spares leaflet at
dometic.com.
Guide wire broken
➤
Order replacement guide wire, see spares leaflet at
dometic.com.
Guide wire blind not running
smoothly
➤
Check restraint positions and recess dimensions.
Fabric rolls off sides of ends of
roller
➤
Check if the guide wires or side tracks are perpen-
dicular to the roller and that the roller is horizontal.