30
Operating the oven
Automatic ignition:
1. Depress the rotary knob
(1)
and turn it from
the 0 position to the ignition position (for
the oven to the left to a position between 2
and 6, for the grill to the right to the “grill”
symbol). Keep the rotary knob pressed.
2. Operate the ignition
(3)
while the rotary
knob is pressed for approx. 5 to 10 sec.
3. The ignition process is activated automati-
cally.
4. Release the rotary knob and turn it to the
desired position (see 5.3).
The wire shelf, drip tray and oven dish
when in the oven must be positioned so
as to avoid coming into contact with the
flames.
CAUTION!
Wear protective gloves when handling hot
objects.
CAUTION!
Fig. 48
Oven
1
Pos.
1
2
3
4
5
6
Temp
°C
130
160
180
200
220
240
In the case of ovens with thermostat, the
various settings of the rotary knob correspond
to the following temperatures in degrees
Celsius.
5.3
Using the oven
Lighting by hand:
1. Depress the rotary knob
(1)
and turn it from
the 0 position to the ignition position (for
the oven to the left to a position between 2
and 6, for the grill to the right to the “grill”
symbol). Keep the rotary knob depressed.
2. Ignite the burner using a match or lighter
while you keep the rotary knob pressed for
5 to 10 seconds.
3. Release the rotary knob and turn it to the
desired position.
4. Close the oven door
(baking)
.
Repeat steps 1 to 3 if the ignition process fails.
If there is still no ignition then, please contact
an authorised customer service agent.
When the oven burner is ignited the flame
remains at high flame in all knob positions.
When the oven reaches the set
temperature the flame automatically goes
down to low flame. If the flame goes out acci-
dentally turn off the gas knob and wait one
minute before re-igniting.
i
Before you put the oven into operation:
n
Open the gas cylinder valve.
n
Open the shut-off valve for gas supply to
the oven
Repeat steps 1 to 4 if the ignition process fails.
If there is still no ignition then, please turn rota-
try knob into “OFF” position. Wait one minute.
Ignite manaully.
289 0457-20_EN_RMDT8xxx-Bedienung_N2_Layout 1 08.05.2015 09:30 Seite 30
