Dometic RMDT10.5T, Installation Manual, Page: 26 / 336

EN
Installing the refrigerator-oven combination RMDT10.5(X)T
26
4.6 Installing the ventilation grill
I
➤
Seal the installation frame to make the connection waterproof (fig.
d
, page 11).
➤
Insert the installation frame and screw it down tightly (fig.
e
, page 11). Use all
the fixing holes for this.
➤
Fit the ventilation grill (fig.
f
1 – 2, page 12).
➤
Insert the slider and lock the ventilation grill with it (fig.
f
3, page 12).
4.7 Installing condensation drain
I
Install the condensation drain as follows:
Variant 1
➤
Run the condensation hose from the refrigerator through an opening in the floor
which goes outside under the vehicle.
Variant 2
➤
Attach the condensation hose directly to the fitting intended for it on the
ventilation grill (fig.
c
4, page 11).
NOTE
Use exclusively original Dometic ventilation grills to ensure safe
operation.
No. in
fig.
c
, page 11
Description
1 Slider
2 Ventilation grill
3 Installation frame
4 Fastening for condensation drain
NOTE
• Condensation can form inside the refrigerator due to frequent door
opening, incorrectly stored food or food that is stored when it is too
warm.
• Condensation must be drained with a constant slope.
DometicRMDT10_INM_4445103409_EMEA18_2021-xx-xx.book Seite 26 Dienstag, 25. Mai 2021 1:08 13