EN
RMDT10.5(X)T
Safety instructions
17
2
Safety instructions
The manufacturer accepts no liability for damage in the following cases:
•
Faulty assembly or connection
•
Damage to the product resulting from mechanical influences and incorrect
connection voltage
•
Alterations to the product without express permission from the manufacturer
•
Use for purposes other than those described in the operating manual
!
WARNING! Failure to obey these warnings could result in death
or serious injury.
Explosion hazard
•
Never open the absorber unit. It is under high pressure and can cause
injury if it is opened.
•
Only
operate the device at the pressure shown on the type plate.
Only use pressure controllers with a fixed setting which comply with
the national regulations (in Europe EN 12864).
Fire hazard
•
Ensure clean and residue-free handling if silicon sealant or similar is
used. There is a risk of fire if silicone filaments come into contact with
hot parts or naked flames.
•
Never use a naked flame to check the device for leaks.
•
Only use propane or butane gas (
not
natural gas).
Health hazard
•
Do not operate the device if it is visibly damaged.
•
If the AC power cable for this device is damaged, it must be replaced
by the manufacturer, a service agent or a similarly qualified person in
order to prevent safety hazards.
•
This device may only be repaired by qualified personnel. Inadequate
repairs may cause serious hazards.
Risk of asphyxiation
•
Dismantle all device doors for the disposal of the old device and leave
the shelves in the device to prevent accidental enclosure and suffoca-
tion.
DometicRMDT10_INM_4445103409_EMEA18_2021-xx-xx.book Seite 17 Dienstag, 25. Mai 2021 1:08 13
