Dometic RMD8**1, Operating Manual

Page: 34 / 128

EN
Using the refrigerator RMD8xxx
34
➤
Push the old panel upwards as far as the stop.
➤
Pull the old panel out of the door.
Removing the decorative trim without frame
Proceed as follows (fig.
f
, page 10):
➤
Push the old panel upwards as far as the stop.
➤
Pull the old panel out of the door.
Installing the decorative trim with frame
Proceed as follows (fig.
e
, page 9):
➤
Push the new panel upwards in the door as far as the stop.
➤
Push the new panel downwards into the door.
➤
Pull the new panel into the door trim still installed.
➤
insert the door trim again.
✓
The door trim is secure once it clicks into place.
Installing the decorative trim without frame
Freezer compartment door (fig.
g
, page 11):
➤
Push the new panel upwards in the door as far as the stop. Make sure that the new
panel fits the door at the left and right, and that it clicks into place.
➤
Push the new panel downwards into the door.
Refrigerator door:
➤
Push two spacers downwards into the door, if necessary (fig.
h
, page 11).
➤
Push the new panel upwards in the door as far as the stop. Make sure that the new
panel fits the door at the left and right, and that it clicks into place (fig.
i
,
page 12).
➤
Push the new panel downwards into the door (fig.
i
, page 12).
RMD8xxx-O-West.book Seite 34 Montag, 15. Mai 2017 9:12 09