15
Fig. 25
4.5.1 Installation in the recess
Push the appliance far enough into the recess
until the front edge of the refrigerator casing is
aligned with the front of the recess. Allow a
gap of 15-20
mm between the back wall of
the recess and the refrigeration unit.
Ensure that the refrigerator is installed
level in the recess.
The refrigerator must be installed draught-
proof in a recess (also refer to Section "4.1.4").
The measurements of the recess are stated in
the table below.
Step A
(Fig. 26) is only requi-
red for cabinets with a step. The floor of the
recess must be level, allowing the appliance to
be pushed easily into its correct position. The
floor must be substantial enough to bear the
weight of the appliance.
4.5
Installation recess
Installation
4.5.2 Recess dimensions
Fig. 26
A
H
T
T
ST
H
ST
Height
Width
Depth
620 mm
490 mm
450 mm
Model RM 5330
Height
Width
Depth
825 mm
490 mm
450 mm
Height
Step
Width
Step
Depth
Step
220 mm
490 mm
225 mm
Model RM 5380
Height
Width
Depth
825 mm
490 mm
450 mm
Model RM 5310
H
T
