EN
PBC110
Scope of delivery
7
4
Scope of delivery
5
Technical description
The battery charger may be placed on the ground or be mounted with four screws
to the wall. It is equipped with heavy-duty cables, corrosion-resistant output connec-
tors and spark-free contacts. It is passively cooled to allow for noise-free operation.
5.1
Protection systems
For safe operation the battery charger is equipped with the following protection sys-
tems:
• Reverse polarity protection:
If the battery charger detects reverse polarity, it will stop delivering output cur-
rent. The red LED will be turned on.
• Short circuit protection:
If the charger detects an output short circuit, it will stop delivering output current.
The red LED will be turned on.
• Internal overheat protection:
The battery charger is equipped with a temperature sensor. When the tempera-
ture becomes too high, the charging current is automatically decreased.
• Timer protection:
The battery charger limits the maximum charging time for each charging stage.
Once the battery charger has timed out, it stops charging the battery. The red
LED will flash slowly.
5.2
Charging process
The battery charger provides a seven stage charging process for charging, desulfat-
ing and maintaining 12 V lead acid and LiFePO4 batteries. Different battery types and
charging rates are selectable. The charging process is controlled by a microproces-
sor.
Quantity
Description
Quantity
1
Battery charger PBC110
1
1
Operation Manual
1
