EN
MSI924M
Connecting the inverter
15
9.2
Connecting the inverter to the battery
I
➤
Set the main switch (fig.
5
1, page 4) to “OFF”.
➤
Loosen the screw (fig.
6
1, page 5) from the red positive terminal (fig.
6
2,
page 5).
➤
Push the cable lug (fig.
6
2, page 5) of the positive cable into the red positive
terminal and fasten it with the screw.
➤
Connect the negative cable to the black negative terminal (fig.
6
4, page 5).
➤
Lay the positive cable from the inverter to the positive terminal of the vehicle bat-
tery and connect it.
➤
Lay the negative cable from the inverter to the negative terminal of the vehicle
battery and connect it.
➤
Connect the earth terminal to the vehicle chassis.
9.3
Connecting the MCR9M remote control (accessory)
A
➤
Connect the remote control (accessory) to the remote port (fig.
4
2, page 4).
NOTE
Tighten the nuts and bolts to a maximum torque of 12 – 13 Nm. Loose
connections may cause overheating.
NOTICE!
•
Only plug in the connection to the remote control in the remote port.
The device can be damaged by connecting it incorrectly.
•
Ensure that the remote control and inverter are supplied with the
same input voltage.
•
Follow the instruction manual of the remote control.
MSI924M-IO-16s.book Seite 15 Mittwoch, 5. April 2017 5:18 17
