EN
Mini Heki Style
Installing Mini Heki Style
7
7
Installing Mini Heki Style
Supplementary to fig.
4
The scope of delivery contains a mounting frame, which is suitable for roof
thicknesses of 25 – 42 mm or 43 – 60 mm.
➤
Measure your roof thickness W.
➤
Shorten the sleeves to size H (see table).
➤
Use the screws with appropriate lengths (see table).
Siehe fig.
5
➤
Check that the roof light has sufficient space around (approx. 1 to 2 mm) it in the
roof opening.
See fig.
6
➤
Clean the roof opening in the mounting area.
See fig.
7
A
➤
Seal the mounting frame with a flexible non-hardening sealing compound (e.g.
SikaLastomer-710).
See fig.
8
➤
Observe the direction of travel when installing.
➤
Place the outer frame in the middle of the roof opening.
➤
Press the outer frame in the roof slightly so that the packing compound spreads
out.
See fig.
9
➤
Install the mounting frame.
➤
Tighten the screws 10 minutes after installation.
See fig.
0
➤
Install the fastening clips on the inner frame at the specified distances.
See fig.
a
➤
Fit the inner frame into the mounting frame.
NOTICE!
Observe the instructions of the sealant manufacturer.
Mini-Heki-Style--IO-16s.book Seite 7 Montag, 23. Januar 2017 5:02 17
