EN
Installing Mini Heki Plus
Mini Heki Plus
14
See fig.
6
➤
Clean the roof opening in the mounting area.
See fig.
7
A
NOTICE!
Observe the instructions of the sealant manufacturer.
➤
Seal the mounting frame with a flexible non-hardening sealing compound
(e.g. Sika - Lastomer-710).
See fig.
8
➤
Observe the direction of travel when installing.
➤
Place the outer frame in the middle of the roof opening.
See fig.
9
➤
Install the mounting frame.
➤
Tighten the screws 10 minutes after installation.
See fig.
0
➤
Install the fastening clips on the inner frame at the specified distances.
See fig.
a
➤
Fit the inner frame into the mounting frame.
See fig.
b
➤
Push the inner frame onto the mounting frame.
➤
After installing, check the roof light works properly.
➤
Remove the protective film from the acrylic glass.
I
NOTE
If the protective film is exposed to sunlight for too long, it cannot be
taken off without leaving a residue.
➤
If necessary, enter the new vehicle height and weight in the vehicle
documents.
