EN
Troubleshooting
MaCave
26
The light does not work
The appliance is not connected
to a power supply
Connect the appliance
Circuit breaker or fuse has blown Switch on the circuit breaker;
switch on or replace the fuse
The light was switched off on the
control panel
Switch on the light
The appliance vibrates
The appliance is not properly
level
Level out the appliance with
the adjustable feet
The appliance seems to
make a lot of noise
The noise is probably caused by the refrigerant, which is nor-
mal. At the end of each cycle, you will hear noises made by the
flow of refrigerant.
If temperature fluctuations occur, the contraction and expansion
of the inner walls may cause popping and cracking noises
The appliance is not properly
level
Level out the appliance with
the adjustable feet
The door does not close
properly
The appliance is not properly
level
Level out the appliance with
the adjustable feet
The door hinge was changed
incorrectly
Check the door hinge and
reassemble correctly
The door seal is dirty
Clean the door seal
The shelves are not fitted cor-
rectly
Check the shelves and refit
correctly
LED display shows
E1, E2
or
E7
.
The temperature sensor for the
air temperature inside the appli-
ance shows an error
This can only be repaired by
an authorised repair centre.
Fault
Possible cause
Remedy
MaCave-S16F-S40FGD-S117FG-O-EN-ZH.book Seite 26 Dienstag, 19. Februar 2019 9:49 09