EN
Using the appliance
MaCave
18
7.4
Information on electrical connection
A
Observe the following when connecting the appliance:
•
Connect the appliance to a circuit that is protected with 15 A.
•
Check that the voltage specification on the type plate is the same as that of the
power supply.
•
If you use an extension cable, this must be approved for the same values as the
appliance, see chapter “Technical data” on page 28.
•
Do not use an extension cable or a multiple power socket that can be switched
off with just one switch.
•
The cable must rest securely behind the appliance and not be allowed to lie or
hang unprotected.
8
Using the appliance
8.1
Storing bottles
A
Please note the following:
•
Only store wine in wine bottles that are closed and still sealed.
•
Do not overload the appliance.
•
Do not cover the shelves with aluminium foil or any other objects, as this
obstructs the air circulation.
•
If the appliance has been empty for a long time, disconnect it from the power
supply and clean it thoroughly. Leave the door open slightly to allow the air to cir-
culate and prevent condensation, mould or odours from building up.
•
After a power cut or if the appliance has been switched off, wait 3 to 5 minutes
before switching on the appliance again.
➤
Position the bottles as shown in fig.
g
, page 6.
NOTICE!
Leave the appliance to stand upright for about 2 hours after transporting,
before you connect it to the power supply.
Otherwise this could cause faults in the cooling system.
NOTICE!
Be sure to use reinforced storage shelves (accessory) if you want to stack
bottles.
MaCave-S16F-S40FGD-S117FG-O-EN-ZH.book Seite 18 Dienstag, 19. Februar 2019 9:49 09
