Dometic IU 812, Installation And Operating Manual, Page: 8 / 180

EN
Safety instructions PerfectCharge IU812
8
A
NOTICE!
•
Before start-up, check that the voltage specification on the type plate
is the same as that of the power supply.
•
Ensure that other objects cannot cause a short circuit at the contacts
of the device.
•
Never pull the plug out of the socket by the connection cable.
•
Store the device in a dry and cool place.
2.2 Safety when connecting the device electronically
D
DANGER! Danger of electrocution
•
For installation on boats:
If electrical devices are incorrectly installed on boats, corrosion dam-
age might occur. Have the device installed by a specialist (marine)
electrician.
•
If you are working on electrical systems, ensure that there is somebody
close at hand who can help you in emergencies.
!
WARNING!
•
Always use sockets which are grounded and secured by residual cur-
rent circuit breakers.
•
Make sure that the lead has a sufficient cross-section.
•
Lay the cables so that they cannot be damaged by the doors or the
bonnet.
Crushed cables can lead to serious injury.
!
CAUTION!
•
Lay the cables so that they cannot be tripped over or damaged.
A
NOTICE!
•
Use ductwork or cable ducts if it is necessary to lay cables through
metal panels or other panels with sharp edges.
•
Do not lay the 230 V mains cable and the 12 V DC cable in the same
duct.
•
Do not lay the cable so that it is loose or heavily kinked.
•
Fasten the cables securely.
•
Do not pull on the cables.
IU812-IO-16s.book Seite 8 Dienstag, 5. Juli 2016 5:02 17